| OID | 1.2.840.10006.300.43.1.1.1.1.4 |
| Module | IEEE8023-LAG-MIB (CISCO) |
| Nom | dot3adAggActorSystemID |
| Acces | readonly |
| Status | current |
| Description | A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 43, only a single
combination of Actor's System ID and System Priority are
considered, and no distinction is made between the
values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol
is described in terms of the operation of aggregation
within a single System. However, the managed objects
provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the
point of view of the operation of Link Aggregation. This
may be of particular use in the configuration of
equipment that has limited aggregation capability (see
43.6). |
| Syntaxe | MacAddress (SNMPv2-TC) |
| Module | LAG-MIB (DELL) |
| Nom | dot3adAggActorSystemID |
| Acces | readonly |
| Status | current |
| Description | A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE -- From the perspective of the Link Aggregation mechanisms described
in Clause 43, only a single combination of Actor's System ID and System
Priority are considered, and no distinction is made between the values of
these parameters for an Aggregator and the port(s) that are associated
with it; i.e., the protocol is described in terms of the operation of
aggregation within a single System. However, the managed objects provided
for the Aggregator and the port both allow management of these parameters.
The result of this is to permit a single piece of equipment to be
configured by management to contain more than one System from the point of
view of the operation of Link Aggregation. This may be of particular use
in the configuration of equipment that has limited aggregation capability
(see 43.6). |
| Syntaxe | MacAddress (SNMPv2-TC) |
| Module | IEEE8023-LAG-MIB (DELL) |
| Nom | dot3adAggActorSystemID |
| Acces | readonly |
| Status | current |
| Description | A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTEFrom the perspective of the Link Aggregation mechanisms described in Clause 43 [Part 3],
only a single combination of Actors System ID and System Priority are considered, and no
distinction is made between the values of these parameters for an Aggregator and the port(s) that
are associated with it; i.e., the protocol is described in terms of the operation of aggregation within
a single System. However, the managed objects provided for the Aggregator and the port both
allow management of these parameters. The result of this is to permit a single piece of equipment
to be configured by management to contain more than one System from the point of view of the
operation of Link Aggregation. This may be of particular use in the configuration of equipment
that has limited aggregation capability (see 43.6 [Part 3]). |
| Syntaxe | MacAddress (SNMPv2-TC) |
| Module | IEEE8023-LAG-MIB (Alcatel) |
| Nom | dot3adAggActorSystemID |
| Acces | readonly |
| Status | current |
| Description | A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 43, only a single
combination of Actor's System ID and System Priority are
considered, and no distinction is made between the
values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol
is described in terms of the operation of aggregation
within a single System. However, the managed objects
provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the
point of view of the operation of Link Aggregation. This
may be of particular use in the configuration of
equipment that has limited aggregation capability (see
5.6). |
| Syntaxe | MacAddress (SNMPv2-TC) |
| Module | IEEE8023-LAG-MIB (FS) |
| Nom | dot3adAggActorSystemID |
| Acces | readonly |
| Status | current |
| Description | A 6-octet read-write MAC address value used as a unique
identifier for the System that contains this Aggregator.
NOTE-From the perspective of the Link Aggregation
mechanisms described in Clause 43, only a single
combination of Actor's System ID and System Priority are
considered, and no distinction is made between the
values of these parameters for an Aggregator and the
port(s) that are associated with it; i.e., the protocol
is described in terms of the operation of aggregation
within a single System. However, the managed objects
provided for the Aggregator and the port both allow
management of these parameters. The result of this is to
permit a single piece of equipment to be configured by
management to contain more than one System from the
point of view of the operation of Link Aggregation. This
may be of particular use in the configuration of
equipment that has limited aggregation capability (see
43.6). |
| Syntaxe | MacAddress (SNMPv2-TC) |
| Module | IEEE8023-LAG-MIB (Force10-9.14.2.1) |
| Nom | dot3adAggAggregateOrIndividual |
| Acces | readonly |
| Status | current |
| Description | A read-only Boolean value indicating whether the
Aggregator represents an Aggregate (`TRUE') or
an Individual link (`FALSE'). |
| Syntaxe | TruthValue (SNMPv2-TC) |