MIB Discovery
1856 modules enregistr├ęs
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 10 (transmission). 166 (mplsStdMIB). 5 (mplsLdpAtmStdMIB). 1 (mplsLdpAtmObjects). 1 (mplsLdpEntityAtmObjects). 2 (mplsLdpEntityAtmLRTable). 1 (mplsLdpEntityAtmLREntry)
TXT : iso. org. dod. internet. mgmt. mib-2. transmission. mplsStdMIB. mplsLdpAtmStdMIB. mplsLdpAtmObjects. mplsLdpEntityAtmObjects. mplsLdpEntityAtmLRTable. mplsLdpEntityAtmLREntry
Module MPLS-LDP-ATM-STD-MIB (ietf)
DescriptionA row in the LDP Entity ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. These are the same data used in the Initialization Message. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having LowerBound vpi/vci == 0/32, and UpperBound vpi/vci == 0/100, and a second entry for this same interface with LowerBound vpi/vci == 0/101 and UpperBound vpi/vci == 0/200. However, there could not be a third entry with LowerBound vpi/vci == 0/200 and UpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e., both entries now have 0/200). A row will not become active unless a unique and non-overlapping range is specified. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table. A request to create a row with an overlapping range should result in an inconsistentValue error.