| Description | Request a bits-per-subcarrier measurement to be made.
A request for a bits-per-subcarrier measurement is made by
setting this object to the value of 'measure'. Upon
completion of the measurement request, the Access Node shall set
this object to 'idle'.
The SNMP agent should allow initiating a bits-per-subcarrier
measurement process only if there is no other bits-per-subcarrier
measurement already running, and respond with an SNMP error
(e.g., wrongValue) otherwise.
Note that a bits-per-subcarrier measurement is also performed
during a line diagnostic procedure. This object provides an
additional mechanism to fetch the bits-per-subcarrier data. This
additional mechanism is provided so that bits-per-subcarrier
data may be fetched without forcing the line into no power state.
This is useful because the bits-per-subcarrier allocation may be
adjusted at show time due to rate adaption and bit swapping.
The implementation of this additional mechanism for measuring
bits per subcarrier is not mandatory.
The results of the bits-per-subcarrier measurement are stored in
xdsl2LineSegmentTable. The status of the bits-per-subcarrier
measurement is indicated by
xdsl2LineCmndConfBpscFailReason. |