MIB Discovery
1856 modules enregistr├ęs
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 10 (transmission). 7 (dot3). 9 (dot3ControlTable). 1 (dot3ControlEntry). 2 (dot3ControlInUnknownOpcodes)
OID : 1.3.6.1.2.1.10.7.9.1.2
TXT : iso. org. dod. internet. mgmt. mib-2. transmission. dot3. dot3ControlTable. dot3ControlEntry. dot3ControlInUnknownOpcodes
Enfants
Pas d'enfants disponibles pour cet OID
D├ętails
OID1.3.6.1.2.1.10.7.9.1.2
Module EtherLike-MIB (CISCO)
Nomdot3ControlInUnknownOpcodes
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter32 (SNMPv2-SMI)
Module EtherLike-MIB (DELL)
Nomdot3ControlInUnknownOpcodes
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter32 (SNMPv2-SMI)
Module EtherLike-MIB (ietf)
Nomdot3ControlInUnknownOpcodes
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter32 (SNMPv2-SMI)
Module EtherLike-MIB (Alcatel)
Nomdot3ControlInUnknownOpcodes
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter32 (SNMPv2-SMI)
Module EtherLike-MIB (Force10-9.14.2.1)
Nomdot3ControlInUnknownOpcodes
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter32 (SNMPv2-SMI)