MIB Discovery

Recherche :

1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 17 (dot1dBridge). 7 (qBridgeMIB). 1 (qBridgeMIBObjects). 2 (dot1qTp). 4 (dot1qForwardAllTable). 1 (dot1qForwardAllEntry). 2 (dot1qForwardAllStaticPorts)
OID : 1.3.6.1.2.1.17.7.1.2.4.1.2
TXT : iso. org. dod. internet. mgmt. mib-2. dot1dBridge. qBridgeMIB. qBridgeMIBObjects. dot1qTp. dot1qForwardAllTable. dot1qForwardAllEntry. dot1qForwardAllStaticPorts
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.17.7.1.2.4.1.2
Module Q-BRIDGE-MIB (CISCO)
Nomdot1qForwardAllStaticPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (DELL)
Nomdot1qForwardAllStaticPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate standard non-EFS behaviour, i.e. forward all multicasts to all ports.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (ietf)
Nomdot1qForwardAllStaticPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (Alcatel)
Nomdot1qForwardAllStaticPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (Force10-9.14.2.1)
Nomdot1qForwardAllStaticPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (FS)
Nomdot1qForwardAllStaticPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (Nexans)
Nomdot1qForwardAllStaticPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate standard non-EFS behaviour, i.e. forward all multicasts to all ports.
SyntaxePortList (Q-BRIDGE-MIB)
D. Fournier - 2024