MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 17 (dot1dBridge). 7 (qBridgeMIB). 1 (qBridgeMIBObjects). 4 (dot1qVlan). 3 (dot1qVlanStaticTable). 1 (dot1qVlanStaticEntry). 4 (dot1qVlanStaticUntaggedPorts)
OID : 1.3.6.1.2.1.17.7.1.4.3.1.4
TXT : iso. org. dod. internet. mgmt. mib-2. dot1dBridge. qBridgeMIB. qBridgeMIBObjects. dot1qVlan. dot1qVlanStaticTable. dot1qVlanStaticEntry. dot1qVlanStaticUntaggedPorts
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.17.7.1.4.3.1.4
Module Q-BRIDGE-MIB (CISCO)
Nomdot1qVlanStaticUntaggedPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (DELL)
Nomdot1qVlanStaticUntaggedPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (ietf)
Nomdot1qVlanStaticUntaggedPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (Alcatel)
Nomdot1qVlanStaticUntaggedPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (Force10-9.14.2.1)
Nomdot1qVlanStaticUntaggedPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (FS)
Nomdot1qVlanStaticUntaggedPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
SyntaxePortList (Q-BRIDGE-MIB)
Module Q-BRIDGE-MIB (Nexans)
Nomdot1qVlanStaticUntaggedPorts
Accesreadwrite
Statuscurrent
DescriptionThe set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
SyntaxePortList (Q-BRIDGE-MIB)