MIB Discovery
1856 modules enregistr├ęs
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 22 (snmpDot3RptrMgt). 2 (rptrMonitorPackage). 3 (rptrMonitorPortInfo). 1 (rptrMonitorPortTable). 1 (rptrMonitorPortEntry). 4 (rptrMonitorPortReadableOctets)
OID : 1.3.6.1.2.1.22.2.3.1.1.4
TXT : iso. org. dod. internet. mgmt. mib-2. snmpDot3RptrMgt. rptrMonitorPackage. rptrMonitorPortInfo. rptrMonitorPortTable. rptrMonitorPortEntry. rptrMonitorPortReadableOctets
Enfants
Pas d'enfants disponibles pour cet OID
D├ętails
OID1.3.6.1.2.1.22.2.3.1.1.4
Module SNMP-REPEATER-MIB (ietf)
NomrptrMonitorPortReadableOctets
Accesreadonly
Statuscurrent
DescriptionThis object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter in a 10Mb/s repeater is 58 minutes. For ports receiving traffic at a maximum rate in a 100Mb/s repeater, this counter can roll over in less than 6 minutes. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information a management station is advised to also poll the rptrMonitorPortUpper32Octets object, or to use the 64-bit counter defined by rptrMonitorPortHCReadableOctets instead of the two 32-bit counters.
SyntaxeCounter32 (SNMPv2-SMI)