MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 351 (stratacom). 110 (basis). 3 (cardSpecific). 17 (vismConfig). 2 (vismVoIpGrp). 14 (vismRtcpRecvMultiplier)
OID : 1.3.6.1.4.1.351.110.3.17.2.14
TXT : iso. org. dod. internet. private. enterprises. stratacom. basis. cardSpecific. vismConfig. vismVoIpGrp. vismRtcpRecvMultiplier
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.351.110.3.17.2.14
Module CISCO-VISM-MODULE-MIB (CISCO)
NomvismRtcpRecvMultiplier
Accesreadwrite
Statuscurrent
DescriptionThe object vismRtcpRepInterval specified above defines an approximate RTCP report interval (defined in RFC 1889) which indicates the interval in milliseconds at which the RTCP reports should be sent to the participating members. The object vismRtcpRecvMultiplier defines how many times the RTCP reports may fail before exception condition activity may be done. The number of times specified in this MIB object times the RTCP Report Interval, a check is made on a VoIP connection (which is in SENDRECV or RECVONLY xGCP modes) to see if any RTP packets have been received. If not, gateway-initiated DLCX should be sent to the call agent. Currently, this interval multiplier is a card-specific value, which means the value is configurable on a per card basis and not on a per call basis. This value is applicable for VoIP adaptation only.
Unitemilliseconds
SyntaxeInteger32 (1...10)