MIB Discovery
1856 modules enregistr├ęs
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 6027 (dellNet). 3 (dellNetMgmt). 15 (dellNetDcb). 3 (dellNetDcbApplicationObjects). 1 (dellNetDCBXObjects). 1 (dellNetDCBXScalars). 1 (dellNetDcbxGlobalTraceLevel)
OID : 1.3.6.1.4.1.6027.3.15.3.1.1.1
TXT : iso. org. dod. internet. private. enterprises. dellNet. dellNetMgmt. dellNetDcb. dellNetDcbApplicationObjects. dellNetDCBXObjects. dellNetDCBXScalars. dellNetDcbxGlobalTraceLevel
Enfants
Pas d'enfants disponibles pour cet OID
D├ętails
OID1.3.6.1.4.1.6027.3.15.3.1.1.1
Module DELL-NETWORKING-DCB-MIB (Force10-9.14.2.1)
NomdellNetDcbxGlobalTraceLevel
Accesreadwrite
Statuscurrent
Description This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - DCBX State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Failure Traces 6 - Configuration Exchange Traces 7 - Auto Detection Traces The remaining bits are unused. The user has to enter the corresponding INTEGER VALUE for the trace to be set. Only one trace can be enabled at a time. To enable all the traces, sum of all individual traces must be provided.
SyntaxeInteger32
Module DF10-DCB-MIB (Force10-9.8.0.0)
NomdF10DcbxGlobalTraceLevel
Accesreadwrite
Statuscurrent
Description This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - DCBX State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Failure Traces 6 - Configuration Exchange Traces 7 - Auto Detection Traces The remaining bits are unused. The user has to enter the corresponding INTEGER VALUE for the trace to be set. Only one trace can be enabled at a time. To enable all the traces, sum of all individual traces must be provided.
SyntaxeInteger32