MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 6486 (alcatel). 801 (alcatelIND1BaseMIB). 1 (alcatelIND1Management). 1 (managementIND1Hardware). 1 (hardwareIND1Entities). 1 (hardentIND1Physical). 1 (alcatelIND1ChassisPhysMIBObjects). 1 (chasEntPhysicalTable). 1 (chasEntPhysicalEntry). 2 (chasEntPhysOperStatus)
OID : 1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2
TXT : iso. org. dod. internet. private. enterprises. alcatel. alcatelIND1BaseMIB. alcatelIND1Management. managementIND1Hardware. hardwareIND1Entities. hardentIND1Physical. alcatelIND1ChassisPhysMIBObjects. chasEntPhysicalTable. chasEntPhysicalEntry. chasEntPhysOperStatus
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2
Module ALCATEL-IND1-CHASSIS-MIB (Alcatel)
NomchasEntPhysOperStatus
Accesreadonly
Statuscurrent
Description All modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value : up <=> powered up Control Module possible value : notPresent <=> CM not present up <=> CM up and running down <=> CM down and powered secondary <=> CM in secondary mode and running NI status possible value : notPresent <=> NI not present up <=> NI up and running down <=> NI down and powered unpowered <=> NI unpowered because there is not enough power in the system (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF (chasEntPhysAdminStatus = powerOff). This operational status has not full meaning without chasEntPhysAdminStatus Fabric status possible value : master <=> up and acting as master up <=> up and acting as slave secondary <=> secondary mode for redundancy Daughter board status possible value : notPresent <=> DB not present up <=> DB up and running down <=> DB down and powered Power supply status possible value : up <=> PS up down <=> PS administratively down unpowered <=> PS not plugged in pwrsave <=> chassis in powersave mode, supply turned off Fan Tray status possible value : up <=> powered up down <=> powered down fault <=> fault detected
SyntaxeEnumeration (1-up, 2-down, 3-testing, 4-unknown, 5-secondary, 6-notPresent, 7-unpowered, 8-master, 9-idle, 10-pwrsave)