OID | 1.3.6.1.4.1.6527.3.1.2.2.1.8.1.16 |
Module | ALCATEL-IND1-TIMETRA-CHASSIS-MIB (Alcatel) |
Nom | tmnxHwOperState |
Acces | readonly |
Status | current |
Description | The actual operational status of this hardware component.
unknown (1) Status cannot be determined
inService (2) Online - If tmnxHwClass has a value of
'ioModule (8)' or 'cpmModule (9), the
card is present, booted, configured,
and running.
outOfService (3) Ready - The hardware component is OK
but is down because tmnxHwAdminState has
a value of 'outOfService (3)'.
diagnosing (4) Not implemented.
failed (5) This hardware component has failed. The
value of tmnxHwFailureReason indicates
the type of failure. If tmnxHwClass has
a value of 'ioModule(8)' or 'cpmModule(9)',
there is a card in the slot but it has
failed.
booting (6) A card is in the transitional startup state.
empty (7) There is no card in the slot and it has
not been pre-configured.
provisioned (8) There is no card in the slot but it has
been pre-configured.
unprovisioned (9) There is a card in the slot but it is not
configured.
upgrade (10) Card software version is compatible with
and newer than that running on the current
active CPM.
downgrade (11) Card software version is compatible with
and older than that running on the current
active CPM.
inServiceUpgrade (12) Card is inService and the card software
version is compatible with and newer than
that running on the current active CPM.
This state applies only to a standby CPM
card. This enumeration is no longer
supported as of release 5.0.
inServiceDowngrade (13) Card is inService and the card software
is compatible with and older than that
running on the current active CPM. This
state applies only to a standby CPM card.
This enumeration is no longer supported
as of release 5.0.
resetPending (14) Card is awaiting reset following an
upgrade or downgrade activity switch.
The card software version is upgrade
or downgrade compatible but will be reset
in order to update it to match the active
CPM software. The value of
tmnxChassisUpdateWaitTime indicates the
how long the system will wait following
an upgrade or downgrade activity switch
before it resets IOM cards. This state
applies only to IOM cards. This
enumeration is no longer supported as of
release 5.0. |
Syntaxe | Enumeration (1-unknown, 2-inService, 3-outOfService, 4-diagnosing, 5-failed, 6-booting, 7-empty, 8-provisioned, 9-unprovisioned, 10-upgrade, 11-downgrade, 12-inServiceUpgrade, 13-inServiceDowngrade, 14-resetPending) |
Module | TIMETRA-CHASSIS-MIB (Alcatel) |
Nom | tmnxHwOperState |
Acces | readonly |
Status | current |
Description | The actual operational status of this hardware component.
unknown (1) Status cannot be determined
inService (2) Online - If tmnxHwClass has a value of
'ioModule (8)' or 'cpmModule (9), the
card is present, booted, configured,
and running.
outOfService (3) Ready - The hardware component is OK
but is down because tmnxHwAdminState has
a value of 'outOfService (3)'.
diagnosing (4) Not implemented.
failed (5) This hardware component has failed. The
value of tmnxHwFailureReason indicates
the type of failure. If tmnxHwClass has
a value of 'ioModule(8)' or 'cpmModule(9)',
there is a card in the slot but it has
failed.
booting (6) A card is in the transitional startup state.
empty (7) There is no card in the slot and it has
not been pre-configured.
provisioned (8) There is no card in the slot but it has
been pre-configured.
unprovisioned (9) There is a card in the slot but it is not
configured.
upgrade (10) Card software version is compatible with
and newer than that running on the current
active CPM.
downgrade (11) Card software version is compatible with
and older than that running on the current
active CPM.
inServiceUpgrade (12) Card is inService and the card software
version is compatible with and newer than
that running on the current active CPM.
This state applies only to a standby CPM
card. This enumeration is no longer
supported as of release 5.0.
inServiceDowngrade (13) Card is inService and the card software
is compatible with and older than that
running on the current active CPM. This
state applies only to a standby CPM card.
This enumeration is no longer supported
as of release 5.0.
resetPending (14) Card is awaiting reset following an
upgrade or downgrade activity switch.
The card software version is upgrade
or downgrade compatible but will be reset
in order to update it to match the active
CPM software. The value of
tmnxChassisUpdateWaitTime indicates the
how long the system will wait following
an upgrade or downgrade activity switch
before it resets IOM cards. This state
applies only to IOM cards. This
enumeration is no longer supported as of
release 5.0. |
Syntaxe | Enumeration (1-unknown, 2-inService, 3-outOfService, 4-diagnosing, 5-failed, 6-booting, 7-empty, 8-provisioned, 9-unprovisioned, 10-upgrade, 11-downgrade, 12-inServiceUpgrade, 13-inServiceDowngrade, 14-resetPending) |