MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 6527 (timetra). 3 (timetraProducts). 1 (tmnxSRMIB). 2 (tmnxSRObjs). 2 (tmnxHwObjs). 4 (tmnxPortObjs). 12 (tmnxDS1Table). 1 (tmnxDS1Entry). 25 (tmnxDS1BerSfThreshold)
OID : 1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25
TXT : iso. org. dod. internet. private. enterprises. timetra. timetraProducts. tmnxSRMIB. tmnxSRObjs. tmnxHwObjs. tmnxPortObjs. tmnxDS1Table. tmnxDS1Entry. tmnxDS1BerSfThreshold
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25
Module ALCATEL-IND1-TIMETRA-PORT-MIB (Alcatel)
NomtmnxDS1BerSfThreshold
Accesreadwrite
Statuscurrent
Description The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold value
Uniteerror bits in million bits received
SyntaxeUnsigned32
Module TIMETRA-PORT-MIB (Alcatel)
NomtmnxDS1BerSfThreshold
Accesreadwrite
Statuscurrent
Description The value of tmnxDS1BerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortDS1Alarm notification for a BER SF failure and a tmnxEqPortDS1AlarmClear notification for a BER SF failure clear. Bit error computed must reach/exceed threshold value over a pre-defined period of time for the tmnxEqPortSonetAlarm notification to be sent. The value of tmnxDS1Framing defines how the bit errors are computed and what values of tmnxDS1BerSfThreshold are allowed. The following table defines this dependency: tmnxDS1Framing Bit error calculation and value supported -------------- ----------------------------------------- esf (1) each CRC error is counted as one bit error g704 (4) values supported are 1,5,10,50,100 other values bit error alarms not supported, value of tmnxDS1BerSfThreshold set to default and cannot be changed tmnxDS1BerSfThreshold value must not be smaller than tmnxDS1BerSdThreshold value
Uniteerror bits in million bits received
SyntaxeUnsigned32