MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 9 (cisco). 10 (ciscoExperiment). 105 (ciscoDot11RadioDiagMIB). 1 (cDot11RadioDiagMIBObjects). 1 (cDot11RadioDiagConfigGlobal). 1 (cDot11RadioDiagTable). 1 (cDot11RadioDiagEntry). 1 (cDot11RadioDiagTempChannel)
OID : 1.3.6.1.4.1.9.10.105.1.1.1.1.1
TXT : iso. org. dod. internet. private. enterprises. cisco. ciscoExperiment. ciscoDot11RadioDiagMIB. cDot11RadioDiagMIBObjects. cDot11RadioDiagConfigGlobal. cDot11RadioDiagTable. cDot11RadioDiagEntry. cDot11RadioDiagTempChannel
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.9.10.105.1.1.1.1.1
Module CISCO-DOT11-RADIO-DIAGNOSTIC-MIB (CISCO)
NomcDot11RadioDiagTempChannel
Accesreadwrite
Statuscurrent
DescriptionTemporary channel number for the 802.11 interface identified by ifIndex. The value this object takes depends on the value of the object dot11PHYType defined in IEEE802dot11-MIB. The semantics are as follows. If dot11PHYType equals 'ofdm', the acceptable values for this object are 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157 and 161. If dot11PHYType equals 'dsss' or 'erp', the acceptable values for this object are from 1 to 14. The channel numbers that can be assigned to this object from the set of acceptable values mentioned above vary depending on the value of the MIB object cd11IfCurrentCarrierSet defined in CISCO-DOT11-IF MIB. The object cDot11RadioDiagSettingsEnabled must be set to 'true' to apply the temporary value specified through this object to the 802.11 interface. Setting cDot11RadioDiagSettingsEnabled to 'false' temporary value to that interface restores the channel setting of this interface to the original value that was there before applying the temporary value to that interface. A value of 0 indicates that this object hasn't been configured with a valid channel number.
SyntaxeUnsigned32