MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 9 (cisco). 10 (ciscoExperiment). 105 (ciscoDot11RadioDiagMIB). 1 (cDot11RadioDiagMIBObjects). 1 (cDot11RadioDiagConfigGlobal). 1 (cDot11RadioDiagTable). 1 (cDot11RadioDiagEntry). 2 (cDot11RadioDiagTempTxPowerLevel)
OID : 1.3.6.1.4.1.9.10.105.1.1.1.1.2
TXT : iso. org. dod. internet. private. enterprises. cisco. ciscoExperiment. ciscoDot11RadioDiagMIB. cDot11RadioDiagMIBObjects. cDot11RadioDiagConfigGlobal. cDot11RadioDiagTable. cDot11RadioDiagEntry. cDot11RadioDiagTempTxPowerLevel
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.9.10.105.1.1.1.1.2
Module CISCO-DOT11-RADIO-DIAGNOSTIC-MIB (CISCO)
NomcDot11RadioDiagTempTxPowerLevel
Accesreadwrite
Statuscurrent
DescriptionTemporary transmit power level for the 802.11 interface identified by ifIndex. A value in the range of 1 to 8 refers to one of the power levels from the MIB table 'dot11PhyTxPowerTable' in IEEE802dot11-MIB. The power levels that can be assigned to this object from the set of acceptable values mentioned above vary depending on the value of the MIB object cd11IfCurrentCarrierSet defined in CISCO-DOT11-IF-MIB. The object cDot11RadioDiagSettingsEnabled must be set to 'true' to apply the temporary value specified through this object to the 802.11 interface. Setting cDot11RadioDiagSettingsEnabled to 'false' restores the power setting of this interface to the original value that was there before applying the temporary value to that interface. A value of 0 indicates that this object hasn't been configured with a valid power level.
SyntaxeUnsigned32 (0...8)