MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 9 (cisco). 10 (ciscoExperiment). 14 (ciscoAtmIfMIB). 1 (ciscoAtmIfMIBObjects). 1 (ciscoAtmIfTable). 1 (ciscoAtmIfEntry). 34 (ciscoAtmIfIlmiAccessFilter)
OID : 1.3.6.1.4.1.9.10.14.1.1.1.34
TXT : iso. org. dod. internet. private. enterprises. cisco. ciscoExperiment. ciscoAtmIfMIB. ciscoAtmIfMIBObjects. ciscoAtmIfTable. ciscoAtmIfEntry. ciscoAtmIfIlmiAccessFilter
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.9.10.14.1.1.1.34
Module CISCO-ATM-IF-MIB (CISCO)
NomciscoAtmIfIlmiAccessFilter
Accesreadwrite
Statuscurrent
DescriptionThe access filter which allows or denies certain ILMI registered addresses on this interface when ciscoAtmIfIlmiAddressRegistration is set to enable(1). permitAll - This permits all ILMI registered addresses. permitPrefix - The address being registered by ILMI should have their prefix portion of the address match the ILMI prefixes used on this interface. If there are any per-interface ILMI address prefixes configured, then the prefixes derived from the switch addresses are not considered ILMI prefixes for this interface. permitPrefixAndWellknownGroups - This is same as 'permitPrefix' but in addition it also allows the well-known group addresses. The well-known group addresses will be the old LECS address and any address matching the ATM Forum address prefix for well known addresses. (i.e.,C5.0079.0000.0000.0000.0000.0000.00A03E) permitPrefixAndAllGroups - This is same as 'permitPrefix' but in addition it allows all group addresses. useGlobalDefaultFilter - It indicates that this interface uses the per-switch global default filter
SyntaxeEnumeration (1-permitAll, 2-permitPrefix, 3-permitPrefixAndWellknownGroups, 4-permitPrefixAndAllGroups, 5-useGlobalDefaultFilter)