| OID | 1.3.6.1.4.1.9.9.130.1.14.1.1 |
| Module | CISCO-ADSL-DMT-LINE-MIB (CISCO) |
| Nom | cAdslLineDmtConfOperatingMode |
| Acces | readwrite |
| Status | current |
| Description | This object specifies the line operating mode being employed
by the ADSL line. An ADSL line uses of one of two operating
modes:
- Automatic
An ATU-C that employs this operating mode automatically
detects the capabilities of the ATU-R and utilizes either
a startup sequence specified by G.992.1, G.992.2, or
T1.413-1998. This line operating mode is the default for
an ADSL line.
- Splitterless
This operating mode should no longer be used. It is
equivalent to the G.992.2 selection. Selecting this
mode will automatically map to the G992.2 mode. It is
appropriate in this case that both the ATU-C and ATU-R
support 'heavy' capability but the ATU-C side wishes to
force 'lite' operation. Selecting this mode will
automatically convert to the G992.2 mode.
- G992.1
This operating mode forces the used of the G994.1 startup
sequence and compliance to G992.1 operation.
- G992.2
This operating mode forces the use of the G994.1
startup sequence and compliance to G992.2 operation.
It is appropriate in this case that both the ATU-C and
ATU-R support 'heavy' capability but the ATU-C side
wishes to force 'lite' operation.
- T1.413
This operating mode forces the ATU-R to use the
T1.413-1998 startup sequence. |
| Syntaxe | Enumeration (1-automatic, 2-splitterless, 3-g992Dot1, 4-g992Dot2, 5-t1Dot413) |