| Description | This object is an extension of the pethPsePortAdminEnable
object from RFC3621. It allows the user to be more specific
when enabling the PSE functions. The states, 'auto', 'static'
and 'limit' correspond to a value of 'true' for the
pethPsePortAdminEnable object. The state 'disable' corresponds
to a value of 'false' for the pethPsePortAdminEnable object.
Setting this value to 'auto' enables Powered Device discovery
on the interface and the amount of power allocated depends on
the Powered Device discovered. If pethPsePortAdminEnable was
'false' prior to this set operation, then it will become
'true'.
Setting this value to 'static' will also enable Powered
Device discovery. However, this is different from 'auto'
in that the amount of power is pre-allocated based on the
configuration on the Power Sourcing Equipment. If
pethPsePortAdminEnable was 'false' prior to this set
operation, then it will become 'true'.
Setting this value to 'limit' enables Powered Device
discovery on the interface. The amount of power allocated
depends on the Powered Device discovered and the value
of cpeExtPsePortPwrMax. The lower value will be used.
If pethPsePortAdminEnable was 'false' prior to this set
operation, then it will become 'true'.
Setting this value to 'disable' disables the PSE functions.
The pethPsePortAdminEnable object will adopt the value of
'false' if it was 'true' prior to this set operation. When
setting the pethPsePortAdminEnable object to 'false' this
object cpeExtPsePortEnable will adopt the value of 'disable'.
If cpeExtPsePortPolicingCapable of the PSE port, or
cpeExtMainPsePwrMonitorCapable of the PSE port's
main group, has the value of 'false', this object
can only be set to 'auto', 'static' or 'disable'.
Otherwise, this object can be set to 'auto', 'static',
'limit' or 'disable'. |