| OID | 1.3.6.1.2.1.17.2.15.1.5 |
| Module | BRIDGE-MIB (CISCO) |
| Nom | dot1dStpPortPathCost |
| Acces | readwrite |
| Status | current |
| Description | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the default
value of this parameter be in inverse proportion to
the speed of the attached LAN.
New implementations should support dot1dStpPortPathCost32.
If the port path costs exceeds the maximum value of this
object then this object should report the maximum value,
namely 65535. Applications should try to read the
dot1dStpPortPathCost32 object if this object reports
the maximum value. |
| Syntaxe | Integer32 (1...65535) |
| Module | BRIDGE-MIB (DELL) |
| Nom | dot1dStpPortPathCost |
| Acces | readwrite |
| Status | mandatory |
| Description | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN. |
| Syntaxe | Integer32 (1...65535) |
| Module | BRIDGE-MIB (ietf) |
| Nom | dot1dStpPortPathCost |
| Acces | readwrite |
| Status | current |
| Description | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the default
value of this parameter be in inverse proportion to
the speed of the attached LAN.
New implementations should support dot1dStpPortPathCost32.
If the port path costs exceeds the maximum value of this
object then this object should report the maximum value,
namely 65535. Applications should try to read the
dot1dStpPortPathCost32 object if this object reports
the maximum value. |
| Syntaxe | Integer32 (1...65535) |
| Module | BRIDGE-MIB (Alcatel) |
| Nom | dot1dStpPortPathCost |
| Acces | readwrite |
| Status | current |
| Description | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the default
value of this parameter be in inverse proportion to
the speed of the attached LAN.
New implementations should support dot1dStpPortPathCost32.
If the port path costs exceeds the maximum value of this
object then this object should report the maximum value,
namely 65535. Applications should try to read the
dot1dStpPortPathCost32 object if this object reports
the maximum value. |
| Syntaxe | Integer32 (1...65535) |
| Module | BRIDGE-MIB (Force10-9.14.2.1) |
| Nom | dot1dStpPortPathCost |
| Acces | readwrite |
| Status | current |
| Description | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the default
value of this parameter be in inverse proportion to
the speed of the attached LAN.
New implementations should support dot1dStpPortPathCost32.
If the port path costs exceeds the maximum value of this
object then this object should report the maximum value,
namely 65535. Applications should try to read the
dot1dStpPortPathCost32 object if this object reports
the maximum value. |
| Syntaxe | Integer32 (1...65535) |
| Module | BRIDGE-MIB (FS) |
| Nom | dot1dStpPortPathCost |
| Acces | readwrite |
| Status | current |
| Description | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the default
value of this parameter be in inverse proportion to
the speed of the attached LAN.
New implementations should support dot1dStpPortPathCost32.
If the port path costs exceeds the maximum value of this
object then this object should report the maximum value,
namely 65535. Applications should try to read the
dot1dStpPortPathCost32 object if this object reports
the maximum value. |
| Syntaxe | Integer32 (1...65535) |
| Module | BRIDGE-MIB (Nexans) |
| Nom | dot1dStpPortPathCost |
| Acces | readwrite |
| Status | current |
| Description | The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1998 recommends that the default
value of this parameter be in inverse proportion to
New implementations should support dot1dStpPortPathCost32.
If the port path costs exceeds the maximum value of this
object then this object should report the maximum value,
namely 65535. Applications should try to read the
dot1dStpPortPathCost32 object if this object reports
the maximum value. |
| Syntaxe | Integer32 (1...65535) |