MIB Discovery
1856 modules enregistr├ęs
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 26 (snmpDot3MauMgt). 5 (dot3IfMauAutoNegGroup). 1 (ifMauAutoNegTable). 1 (ifMauAutoNegEntry). 1 (ifMauAutoNegAdminStatus)
OID : 1.3.6.1.2.1.26.5.1.1.1
TXT : iso. org. dod. internet. mgmt. mib-2. snmpDot3MauMgt. dot3IfMauAutoNegGroup. ifMauAutoNegTable. ifMauAutoNegEntry. ifMauAutoNegAdminStatus
Enfants
Pas d'enfants disponibles pour cet OID
D├ętails
OID1.3.6.1.2.1.26.5.1.1.1
Module MAU-MIB (CISCO)
NomifMauAutoNegAdminStatus
Accesreadwrite
Statuscurrent
DescriptionSetting this object to enabled(1) will cause the interface which has the auto-negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. Under these conditions, an IEEE 802.3 MAU will immediately be forced to the state indicated by the value of the object ifMauDefaultType. NOTE TO IMPLEMENTORS: When ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by the ifMauDefaultType object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
SyntaxeEnumeration (1-enabled, 2-disabled)
Module MAU-MIB (DELL)
NomifMauAutoNegAdminStatus
Accesreadwrite
Statuscurrent
DescriptionSetting this object to enabled(1) will cause the interface which has the auto-negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. Under these conditions, an IEEE 802.3 MAU will immediately be forced to the state indicated by the value of the object ifMauDefaultType. NOTE TO IMPLEMENTORS: When ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by the ifMauDefaultType object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
SyntaxeEnumeration (1-enabled, 2-disabled)
Module MAU-MIB (ietf)
NomifMauAutoNegAdminStatus
Accesreadwrite
Statuscurrent
DescriptionSetting this object to enabled(1) will cause the interface that has the auto-negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. Under these conditions, an IEEE 802.3 MAU will immediately be forced to the state indicated by the value of the object ifMauDefaultType. NOTE TO IMPLEMENTORS: When ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by the ifMauDefaultType object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
SyntaxeEnumeration (1-enabled, 2-disabled)
Module MAU-MIB (Alcatel)
NomifMauAutoNegAdminStatus
Accesreadwrite
Statuscurrent
DescriptionSetting this object to enabled(1) will cause the interface which has the auto-negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. Under these conditions, an IEEE 802.3 MAU will immediately be forced to the state indicated by the value of the object ifMauDefaultType. NOTE TO IMPLEMENTORS: When ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by the ifMauDefaultType object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
SyntaxeEnumeration (1-enabled, 2-disabled)