MIB Discovery
1856 modules enregistr├ęs
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 6527 (timetra). 3 (timetraProducts). 1 (tmnxSRMIB). 2 (tmnxSRObjs). 4 (tmnxServObjs). 3 (tmnxSapObjs). 40 (sapCemInfoTable). 1 (sapCemInfoEntry). 5 (sapCemPayloadSize)
OID : 1.3.6.1.4.1.6527.3.1.2.4.3.40.1.5
TXT : iso. org. dod. internet. private. enterprises. timetra. timetraProducts. tmnxSRMIB. tmnxSRObjs. tmnxServObjs. tmnxSapObjs. sapCemInfoTable. sapCemInfoEntry. sapCemPayloadSize
Enfants
Pas d'enfants disponibles pour cet OID
D├ętails
OID1.3.6.1.4.1.6527.3.1.2.4.3.40.1.5
Module ALCATEL-IND1-TIMETRA-SAP-MIB (Alcatel)
NomsapCemPayloadSize
Accesreadwrite
Statuscurrent
Description This object specifies the payload size (in bytes) of packets transmitted to the Packet Service Network (PSN) by the CEM SAP. This determines the size of the data that will be transmitted over the service. As well, if the size of the data received is not consistent with the payload size then the packet is considered malformed. Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 64 bytes | | +-----------+----------------------- | | N = 2..4 | N x 32 bytes | | +-----------+----------------------- | | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | N x 24 bytes | --------------------------------------------------------- For all endpoint types except for 'nxDS0WithCas', valid payload size range is from the default (in the table above) to 2048 bytes. For 'nxDS0WithCas', sapCemPayloadSize divide by the number of timeslots (sapCemBitrate) must be an integer factor of the number of frames per trunk multiframe (i.e. 16 for E1 trunk and 24 for T1 trunk). For '1xDS0', sapCemPayloadSize must be a multiple of 2. For 'NxDS0', where N > 1, sapCemPayloadSize must be a multiple of the number of timeslots (sapCemBitrate). For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3' and 'unstructuredT3', sapCemPayloadSize must be a multiple of 32 bytes. Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffer is not allowed. Setting this object to 0 sets it back to the default value.
Unitebytes
SyntaxeUnsigned32
Module TIMETRA-SAP-MIB (Alcatel)
NomsapCemPayloadSize
Accesreadwrite
Statuscurrent
Description This object specifies the payload size (in bytes) of packets transmitted to the Packet Service Network (PSN) by the CEM SAP. This determines the size of the data that will be transmitted over the service. As well, if the size of the data received is not consistent with the payload size then the packet is considered malformed. Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 64 bytes | | +-----------+----------------------- | | N = 2..4 | N x 32 bytes | | +-----------+----------------------- | | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | N x 24 bytes | --------------------------------------------------------- For all endpoint types except for 'nxDS0WithCas', valid payload size range is from the default (in the table above) to 2048 bytes. For 'nxDS0WithCas', sapCemPayloadSize divide by the number of timeslots (sapCemBitrate) must be an integer factor of the number of frames per trunk multiframe (i.e. 16 for E1 trunk and 24 for T1 trunk). For '1xDS0', sapCemPayloadSize must be a multiple of 2. For 'NxDS0', where N > 1, sapCemPayloadSize must be a multiple of the number of timeslots (sapCemBitrate). For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3' and 'unstructuredT3', sapCemPayloadSize must be a multiple of 32 bytes. Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffer is not allowed. Setting this object to 0 sets it back to the default value.
Unitebytes
SyntaxeUnsigned32