| OID | 1.0.8802.1.1.2.1.1.4 |
| Module | LLDP-MIB (CISCO) |
| Nom | lldpTxDelay |
| Acces | readwrite |
| Status | current |
| Description | The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
The default value for lldpTxDelay object is two seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system. |
| Unite | seconds |
| Syntaxe | Integer32 (1...8192) |
| Module | LLDP-MIB (DELL) |
| Nom | lldpTxDelay |
| Acces | readwrite |
| Status | current |
| Description | The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
The default value for lldpTxDelay object is two seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system. |
| Unite | seconds |
| Syntaxe | Integer32 (1...8192) |
| Module | LLDP-MIB (Alcatel) |
| Nom | lldpTxDelay |
| Acces | readwrite |
| Status | current |
| Description | The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
The default value for lldpTxDelay object is two seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system. |
| Unite | seconds |
| Syntaxe | Integer32 (1...8192) |
| Module | LLDP-MIB (Force10-9.14.2.1) |
| Nom | lldpTxDelay |
| Acces | readwrite |
| Status | current |
| Description | The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
The default value for lldpTxDelay object is two seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system. |
| Unite | seconds |
| Syntaxe | Integer32 (1...8192) |
| Module | LLDP-MIB (FS) |
| Nom | lldpTxDelay |
| Acces | readwrite |
| Status | current |
| Description | The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
The default value for lldpTxDelay object is two seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system. |
| Unite | seconds |
| Syntaxe | Integer32 (1...8192) |
| Module | LLDP-MIB (Nexans) |
| Nom | lldpTxDelay |
| Acces | readwrite |
| Status | current |
| Description | The lldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB. The recommended value for the lldpTxDelay is set by the
following formula:
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
The default value for lldpTxDelay object is two seconds.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system. |
| Unite | seconds |
| Syntaxe | Integer32 (1...8192) |