MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 10 (transmission). 166 (mplsStdMIB). 2 (mplsLsrStdMIB). 1 (mplsLsrObjects). 1 (mplsInterfaceTable). 1 (mplsInterfaceEntry). 7 (mplsInterfaceAvailableBandwidth)
OID : 1.3.6.1.2.1.10.166.2.1.1.1.7
TXT : iso. org. dod. internet. mgmt. mib-2. transmission. mplsStdMIB. mplsLsrStdMIB. mplsLsrObjects. mplsInterfaceTable. mplsInterfaceEntry. mplsInterfaceAvailableBandwidth
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.10.166.2.1.1.1.7
Module MPLS-LSR-STD-MIB (CISCO)
NommplsInterfaceAvailableBandwidth
Accesreadonly
Statuscurrent
DescriptionThis value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0. When this value cannot be measured, this value should contain the nominal bandwidth.
SyntaxeMplsBitRate (MPLS-TC-STD-MIB)
Module MPLS-LSR-STD-MIB (ietf)
NommplsInterfaceAvailableBandwidth
Accesreadonly
Statuscurrent
DescriptionThis value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0. When this value cannot be measured, this value should contain the nominal bandwidth.
SyntaxeMplsBitRate (MPLS-TC-STD-MIB)
Module MPLS-LSR-STD-MIB (FS)
NommplsInterfaceAvailableBandwidth
Accesreadonly
Statuscurrent
DescriptionThis value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0. When this value cannot be measured, this value should contain the nominal bandwidth.
SyntaxeMplsBitRate (MPLS-TC-STD-MIB)