OID | 1.3.6.1.2.1.10.238.1.5.1.2.1.11 |
Module | ADSL2-LINE-MIB (CISCO) |
Nom | adsl2LConfProfRaDsNrmsDs |
Acces | readwrite |
Status | current |
Description | The Downstream Down-Shift Noise Margin value, to be used when
adsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and stays below that for more
than the time specified by the adsl2LConfProfRaDsTimeDs, the
ATU-R shall attempt to decrease the downstream net data rate.
The Downstream Down-Shift Noise Margin ranges from 0 to 310
units of 0.1 dB (physical values are 0 to 31 dB). |
Unite | 0.1 dB |
Syntaxe | Unsigned32 (0...310) |
Module | ADSL2-LINE-MIB (ietf) |
Nom | adsl2LConfProfRaDsNrmsDs |
Acces | readwrite |
Status | current |
Description | The Downstream Down-Shift Noise Margin value, to be used when
adsl2LConfProfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and stays below that for more
than the time specified by the adsl2LConfProfRaDsTimeDs, the
ATU-R shall attempt to decrease the downstream net data rate.
The Downstream Down-Shift Noise Margin ranges from 0 to 310
units of 0.1 dB (physical values are 0 to 31 dB). |
Unite | 0.1 dB |
Syntaxe | Unsigned32 (0...310) |