OID | 1.3.6.1.2.1.10.238.1.5.1.2.1.12 |
Module | ADSL2-LINE-MIB (CISCO) |
Nom | adsl2LConfProfRaDsNrmsUs |
Acces | readwrite |
Status | current |
Description | The Upstream Down-Shift Noise Margin value, to be used when
adsl2LConfProfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays below that for more
than the time specified by the adsl2LConfProfRaDsTimeUs, the
ATU-C shall attempt to decrease the upstream net data rate.
The Upstream Down-Shift Noise Margin ranges from 0 to 310
units of 0.1 dB (physical values are 0 to 31 dB). |
Unite | 0.1 dB |
Syntaxe | Unsigned32 (0...310) |
Module | ADSL2-LINE-MIB (ietf) |
Nom | adsl2LConfProfRaDsNrmsUs |
Acces | readwrite |
Status | current |
Description | The Upstream Down-Shift Noise Margin value, to be used when
adsl2LConfProfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays below that for more
than the time specified by the adsl2LConfProfRaDsTimeUs, the
ATU-C shall attempt to decrease the upstream net data rate.
The Upstream Down-Shift Noise Margin ranges from 0 to 310
units of 0.1 dB (physical values are 0 to 31 dB). |
Unite | 0.1 dB |
Syntaxe | Unsigned32 (0...310) |