| OID | 1.3.6.1.2.1.10.33.4.1.10 |
| Module | RS-232-MIB (CISCO) |
| Nom | rs232SyncPortRTSControl |
| Acces | readwrite |
| Status | current |
| Description | The method used to control the Request To Send (RTS)
signal.
controlled when the DTE is asserts RTS each time
data needs to be transmitted and drops
RTS at some point after data
transmission begins.
If rs232SyncPortRole is 'dte', the
RTS is an output signal. The device
will issue a RTS and wait for a CTS
from the DCE before starting to
transmit.
If rs232SyncPortRole is 'dce', the
RTS is an input signal. The device
will issue a CTS only after having
received RTS and waiting the
rs232SyncPortRTSCTSDelay interval.
constant when the DTE constantly asserts RTS. |
| Syntaxe | Enumeration (1-controlled, 2-constant) |
| Module | RS-232-MIB (ietf) |
| Nom | rs232SyncPortRTSControl |
| Acces | readwrite |
| Status | current |
| Description | The method used to control the Request To Send (RTS)
signal.
controlled when the DTE is asserts RTS each time
data needs to be transmitted and drops
RTS at some point after data
transmission begins.
If rs232SyncPortRole is 'dte', the
RTS is an output signal. The device
will issue a RTS and wait for a CTS
from the DCE before starting to
transmit.
If rs232SyncPortRole is 'dce', the
RTS is an input signal. The device
will issue a CTS only after having
received RTS and waiting the
rs232SyncPortRTSCTSDelay interval.
constant when the DTE constantly asserts RTS. |
| Syntaxe | Enumeration (1-controlled, 2-constant) |
| Module | RS-232-MIB (Alcatel) |
| Nom | rs232SyncPortRTSControl |
| Acces | readwrite |
| Status | current |
| Description | The method used to control the Request To Send (RTS)
signal.
controlled when the DTE is asserts RTS each time
data needs to be transmitted and drops
RTS at some point after data
transmission begins.
If rs232SyncPortRole is 'dte', the
RTS is an output signal. The device
will issue a RTS and wait for a CTS
from the DCE before starting to
transmit.
If rs232SyncPortRole is 'dce', the
RTS is an input signal. The device
will issue a CTS only after having
received RTS and waiting the
rs232SyncPortRTSCTSDelay interval.
constant when the DTE constantly asserts RTS. |
| Syntaxe | Enumeration (1-controlled, 2-constant) |