OID | 1.3.6.1.2.1.10.7.10.1.2 |
Module | EtherLike-MIB (CISCO) |
Nom | dot3PauseOperMode |
Acces | readonly |
Status | current |
Description | This object reflects the PAUSE mode currently
in use on this interface, as determined by
either (1) the result of the auto-negotiation
function or (2) if auto-negotiation is not
enabled or is not implemented for the active MAU
attached to this interface, by the value of
dot3PauseAdminMode. Interfaces operating at
100 Mb/s or less will never return
'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces
operating in half-duplex mode will always return
'disabled(1)'. Interfaces on which
auto-negotiation is enabled but not yet
completed should return the value
'disabled(1)'. |
Syntaxe | Enumeration (1-disabled, 2-enabledXmit, 3-enabledRcv, 4-enabledXmitAndRcv) |
Module | EtherLike-MIB (DELL) |
Nom | dot3PauseOperMode |
Acces | readonly |
Status | current |
Description | This object reflects the PAUSE mode currently
in use on this interface, as determined by
either (1) the result of the auto-negotiation
function or (2) if auto-negotiation is not
enabled or is not implemented for the active MAU
attached to this interface, by the value of
dot3PauseAdminMode. Interfaces operating at
100 Mb/s or less will never return
'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces
operating in half-duplex mode will always return
'disabled(1)'. Interfaces on which
auto-negotiation is enabled but not yet
completed should return the value
'disabled(1)'. |
Syntaxe | Enumeration (1-disabled, 2-enabledXmit, 3-enabledRcv, 4-enabledXmitAndRcv) |
Module | EtherLike-MIB (ietf) |
Nom | dot3PauseOperMode |
Acces | readonly |
Status | current |
Description | This object reflects the PAUSE mode currently
in use on this interface, as determined by
either (1) the result of the auto-negotiation
function or (2) if auto-negotiation is not
enabled or is not implemented for the active MAU
attached to this interface, by the value of
dot3PauseAdminMode. Interfaces operating at
100 Mb/s or less will never return
'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces
operating in half-duplex mode will always return
'disabled(1)'. Interfaces on which
auto-negotiation is enabled but not yet
completed should return the value
'disabled(1)'. |
Syntaxe | Enumeration (1-disabled, 2-enabledXmit, 3-enabledRcv, 4-enabledXmitAndRcv) |
Module | EtherLike-MIB (Alcatel) |
Nom | dot3PauseOperMode |
Acces | readonly |
Status | current |
Description | This object reflects the PAUSE mode currently
in use on this interface, as determined by
either (1) the result of the auto-negotiation
function or (2) if auto-negotiation is not
enabled or is not implemented for the active MAU
attached to this interface, by the value of
dot3PauseAdminMode. Interfaces operating at
100 Mb/s or less will never return
'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces
operating in half-duplex mode will always return
'disabled(1)'. Interfaces on which
auto-negotiation is enabled but not yet
completed should return the value
'disabled(1)'. |
Syntaxe | Enumeration (1-disabled, 2-enabledXmit, 3-enabledRcv, 4-enabledXmitAndRcv) |
Module | EtherLike-MIB (Force10-9.14.2.1) |
Nom | dot3PauseOperMode |
Acces | readonly |
Status | current |
Description | This object reflects the PAUSE mode currently
in use on this interface, as determined by
either (1) the result of the auto-negotiation
function or (2) if auto-negotiation is not
enabled or is not implemented for the active MAU
attached to this interface, by the value of
dot3PauseAdminMode. Interfaces operating at
100 Mb/s or less will never return
'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces
operating in half-duplex mode will always return
'disabled(1)'. Interfaces on which
auto-negotiation is enabled but not yet
completed should return the value
'disabled(1)'. |
Syntaxe | Enumeration (1-disabled, 2-enabledXmit, 3-enabledRcv, 4-enabledXmitAndRcv) |