| OID | 1.3.6.1.2.1.10.7.10.1.4 |
| Module | EtherLike-MIB (CISCO) |
| Nom | dot3OutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCOutPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (DELL) |
| Nom | dot3OutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCOutPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (ietf) |
| Nom | dot3OutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCOutPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (Alcatel) |
| Nom | dot3OutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (Force10-9.14.2.1) |
| Nom | dot3OutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCOutPauseFrames object for 10 Gb/s or
faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |