MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 10 (transmission). 7 (dot3). 10 (dot3PauseTable). 1 (dot3PauseEntry). 5 (dot3HCInPauseFrames)
OID : 1.3.6.1.2.1.10.7.10.1.5
TXT : iso. org. dod. internet. mgmt. mib-2. transmission. dot3. dot3PauseTable. dot3PauseEntry. dot3HCInPauseFrames
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.10.7.10.1.5
Module EtherLike-MIB (CISCO)
Nomdot3HCInPauseFrames
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. This counter is a 64 bit version of dot3InPauseFrames. It should be used on interfaces operating at 10 Gb/s or faster. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter64 (SNMPv2-SMI)
Module EtherLike-MIB (DELL)
Nomdot3HCInPauseFrames
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. This counter is a 64 bit version of dot3InPauseFrames. It should be used on interfaces operating at 10 Gb/s or faster. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter64 (SNMPv2-SMI)
Module EtherLike-MIB (ietf)
Nomdot3HCInPauseFrames
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. This counter is a 64 bit version of dot3InPauseFrames. It should be used on interfaces operating at 10 Gb/s or faster. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter64 (SNMPv2-SMI)
Module EtherLike-MIB (Force10-9.14.2.1)
Nomdot3HCInPauseFrames
Accesreadonly
Statuscurrent
DescriptionA count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. This counter is a 64 bit version of dot3InPauseFrames. It should be used on interfaces operating at 10 Gb/s or faster. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
SyntaxeCounter64 (SNMPv2-SMI)