| OID | 1.3.6.1.2.1.10.7.10.1.6 |
| Module | EtherLike-MIB (CISCO) |
| Nom | dot3HCOutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
This counter is a 64 bit version of
dot3OutPauseFrames. It should be used on
interfaces operating at 10 Gb/s or faster.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter64 (SNMPv2-SMI) |
| Module | EtherLike-MIB (DELL) |
| Nom | dot3HCOutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
This counter is a 64 bit version of
dot3OutPauseFrames. It should be used on
interfaces operating at 10 Gb/s or faster.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter64 (SNMPv2-SMI) |
| Module | EtherLike-MIB (ietf) |
| Nom | dot3HCOutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
This counter is a 64 bit version of
dot3OutPauseFrames. It should be used on
interfaces operating at 10 Gb/s or faster.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter64 (SNMPv2-SMI) |
| Module | EtherLike-MIB (Force10-9.14.2.1) |
| Nom | dot3HCOutPauseFrames |
| Acces | readonly |
| Status | current |
| Description | A count of MAC Control frames transmitted on
this interface with an opcode indicating the
PAUSE operation.
This counter does not increment when the
interface is operating in half-duplex mode.
This counter is a 64 bit version of
dot3OutPauseFrames. It should be used on
interfaces operating at 10 Gb/s or faster.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter64 (SNMPv2-SMI) |