| OID | 1.3.6.1.2.1.10.7.2.1.6 |
| Module | EtherLike-MIB (CISCO) |
| Nom | dot3StatsSQETestErrors |
| Acces | readonly |
| Status | current |
| Description | A count of times that the SQE TEST ERROR
is received on a particular interface. The
SQE TEST ERROR is set in accordance with the
rules for verification of the SQE detection
mechanism in the PLS Carrier Sense Function as
described in IEEE Std. 802.3, 2000 Edition,
section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (DELL) |
| Nom | dot3StatsSQETestErrors |
| Acces | readonly |
| Status | current |
| Description | A count of times that the SQE TEST ERROR
is received on a particular interface. The
SQE TEST ERROR is set in accordance with the
rules for verification of the SQE detection
mechanism in the PLS Carrier Sense Function as
described in IEEE Std. 802.3, 2000 Edition,
section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (ietf) |
| Nom | dot3StatsSQETestErrors |
| Acces | readonly |
| Status | current |
| Description | A count of times that the SQE TEST ERROR
is received on a particular interface. The
SQE TEST ERROR is set in accordance with the
rules for verification of the SQE detection
mechanism in the PLS Carrier Sense Function as
described in IEEE Std. 802.3, 2000 Edition,
section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (Alcatel) |
| Nom | dot3StatsSQETestErrors |
| Acces | readonly |
| Status | current |
| Description | A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface. The SQE TEST ERROR
is set in accordance with the rules for
verification of the SQE detection mechanism in
the PLS Carrier Sense Function as described in
IEEE Std. 802.3, 1998 Edition, section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (Force10-9.14.2.1) |
| Nom | dot3StatsSQETestErrors |
| Acces | readonly |
| Status | current |
| Description | A count of times that the SQE TEST ERROR
is received on a particular interface. The
SQE TEST ERROR is set in accordance with the
rules for verification of the SQE detection
mechanism in the PLS Carrier Sense Function as
described in IEEE Std. 802.3, 2000 Edition,
section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |
| Module | EtherLike-MIB (Nexans) |
| Nom | dot3StatsSQETestErrors |
| Acces | readonly |
| Status | current |
| Description | A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface. The SQE TEST ERROR
is set in accordance with the rules for
verification of the SQE detection mechanism in
the PLS Carrier Sense Function as described in
IEEE Std. 802.3, 1998 Edition, section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime. |
| Syntaxe | Counter32 (SNMPv2-SMI) |