MIB Discovery
1926 modules enregistr├ęs
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 10 (transmission). 94 (adslMIB). 3 (adslExtMIB). 1 (adslExtMibObjects). 17 (adslLineExtTable). 1 (adslLineExtEntry). 4 (adslLineGlitePowerState)
TXT : iso. org. dod. internet. mgmt. mib-2. transmission. adslMIB. adslExtMIB. adslExtMibObjects. adslLineExtTable. adslLineExtEntry. adslLineGlitePowerState
Pas d'enfants disponibles pour cet OID
Module ADSL-LINE-EXT-MIB (ietf)
DescriptionThe value of this object specifies the power state of this interface. L0 is power on, L1 is power on but reduced and L3 is power off. Power state cannot be configured by an operator but it can be viewed via the ifOperStatus object for the managed ADSL interface. The value of the object ifOperStatus is set to down(2) if the ADSL interface is in power state L3 and is set to up(1) if the ADSL line interface is in power state L0 or L1. If the object adslLineTransAtucActual is set to a G.992.2 (G.Lite)-type transmission mode, the value of this object will be one of the valid power states: L0(2), L1(3), or L3(4). Otherwise, its value will be none(1).
SyntaxeEnumeration (1-none, 2-l0, 3-l1, 4-l3)