| OID | 1.3.6.1.2.1.105.1.1.1.6 |
| Module | POWER-ETHERNET-MIB (CISCO) |
| Nom | pethPsePortDetectionStatus |
| Acces | readonly |
| Status | current |
| Description | Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - indicates that the PSE State
diagram is in the state POWER_ON for a duration greater than
tlim max (see IEEE Std 802.3af Table 33-5 tlim).
A value of fault(4) - indicates that the PSE State diagram is
in the state TEST_ERROR.
A value of test(5) - indicates that the PSE State diagram is
in the state TEST_MODE.
A value of otherFault(6) - indicates that the PSE State
diagram is in the state IDLE due to the variable
error_conditions.
A value of searching(2)- indicates the PSE State diagram is
in a state other than those listed above. |
| Syntaxe | Enumeration (1-disabled, 2-searching, 3-deliveringPower, 4-fault, 5-test, 6-otherFault) |
| Module | POWER-ETHERNET-MIB (DELL) |
| Nom | pethPsePortDetectionStatus |
| Acces | readonly |
| Status | current |
| Description | Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - indicates that the PSE State
diagram is in the state POWER_ON for a duration greater than
tlim max (see IEEE Std 802.3af Table 33-5 tlim).
A value of fault(4) - indicates that the PSE State diagram is
in the state TEST_ERROR.
A value of test(5) - indicates that the PSE State diagram is
in the state TEST_MODE.
A value of otherFault(6) - indicates that the PSE State
diagram is in the state IDLE due to the variable
error_conditions.
A value of searching(2)- indicates the PSE State diagram is
in a state other than those listed above. |
| Syntaxe | Enumeration (1-disabled, 2-searching, 3-deliveringPower, 4-fault, 5-test, 6-otherFault) |
| Module | POWER-ETHERNET-MIB (ietf) |
| Nom | pethPsePortDetectionStatus |
| Acces | readonly |
| Status | current |
| Description | Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - indicates that the PSE State
diagram is in the state POWER_ON for a duration greater than
tlim max (see IEEE Std 802.3af Table 33-5 tlim).
A value of fault(4) - indicates that the PSE State diagram is
in the state TEST_ERROR.
A value of test(5) - indicates that the PSE State diagram is
in the state TEST_MODE.
A value of otherFault(6) - indicates that the PSE State
diagram is in the state IDLE due to the variable
error_conditions.
A value of searching(2)- indicates the PSE State diagram is
in a state other than those listed above. |
| Syntaxe | Enumeration (1-disabled, 2-searching, 3-deliveringPower, 4-fault, 5-test, 6-otherFault) |
| Module | POWER-ETHERNET-MIB (Alcatel) |
| Nom | pethPsePortDetectionStatus |
| Acces | readonly |
| Status | current |
| Description | Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - indicates that the PSE State
diagram is in the state POWER_ON for a duration greater than
tlim max (see IEEE Std 802.3af Table 33-5 tlim).
A value of fault(4) - indicates that the PSE State diagram is
in the state TEST_ERROR.
A value of test(5) - indicates that the PSE State diagram is
in the state TEST_MODE.
A value of otherFault(6) - indicates that the PSE State
diagram is in the state IDLE due to the variable
error_conditions.
A value of searching(2)- indicates the PSE State diagram is
in a state other than those listed above. |
| Syntaxe | Enumeration (1-disabled, 2-searching, 3-deliveringPower, 4-fault, 5-test, 6-otherFault) |