MIB Discovery
1926 modules enregistr├ęs
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 127 (docsIetfQosMIB). 1 (docsIetfQosMIBObjects). 1 (docsIetfQosPktClassTable). 1 (docsIetfQosPktClassEntry). 21 (docsIetfQosPktClassEnetProtocol)
OID : 1.3.6.1.2.1.127.1.1.1.21
TXT : iso. org. dod. internet. mgmt. mib-2. docsIetfQosMIB. docsIetfQosMIBObjects. docsIetfQosPktClassTable. docsIetfQosPktClassEntry. docsIetfQosPktClassEnetProtocol
Enfants
Pas d'enfants disponibles pour cet OID
D├ętails
OID1.3.6.1.2.1.127.1.1.1.21
Module DOCS-IETF-QOS-MIB (CISCO)
NomdocsIetfQosPktClassEnetProtocol
Accesreadonly
Statuscurrent
DescriptionIf docsIetfQosEthPktClassProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. If dosQosPktClassEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If docsIetfQosPktClassEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule. If docsIetfQosPktClassEnetProtocolType is mac(3), the lower 8 bits of this object's value represent a lower bound (inclusive) of MAC management message type codes matched, and the upper 8 bits represent the upper bound (inclusive) of matched MAC message type codes. Certain message type codes are excluded from matching, as specified in the reference. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in the classifier, the value of this object is reported as 0.
SyntaxeInteger32 (0...65535)
Module DOCS-IETF-QOS-MIB (ietf)
NomdocsIetfQosPktClassEnetProtocol
Accesreadonly
Statuscurrent
DescriptionIf docsIetfQosEthPktClassProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. If dosQosPktClassEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If docsIetfQosPktClassEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule. If docsIetfQosPktClassEnetProtocolType is mac(3), the lower 8 bits of this object's value represent a lower bound (inclusive) of MAC management message type codes matched, and the upper 8 bits represent the upper bound (inclusive) of matched MAC message type codes. Certain message type codes are excluded from matching, as specified in the reference. If the Ethernet frame contains an 802.1P/Q Tag header (i.e., EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in the classifier, the value of this object is reported as 0.
SyntaxeInteger32 (0...65535)