MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 127 (docsIetfQosMIB). 1 (docsIetfQosMIBObjects). 2 (docsIetfQosParamSetTable). 1 (docsIetfQosParamSetEntry). 3 (docsIetfQosParamSetMaxTrafficRate)
OID : 1.3.6.1.2.1.127.1.2.1.3
TXT : iso. org. dod. internet. mgmt. mib-2. docsIetfQosMIB. docsIetfQosMIBObjects. docsIetfQosParamSetTable. docsIetfQosParamSetEntry. docsIetfQosParamSetMaxTrafficRate
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.127.1.2.1.3
Module DOCS-IETF-QOS-MIB (CISCO)
NomdocsIetfQosParamSetMaxTrafficRate
Accesreadonly
Statuscurrent
DescriptionMaximum sustained traffic rate allowed for this Service Flow in bits/sec. Must count all MAC frame data PDU from the bytes following the MAC header HCS to the end of the CRC. The number of bytes forwarded is limited during any time interval. The value 0 means no maximum traffic rate is enforced. This object applies to both upstream and downstream Service Flows. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object is 0. If the parameter is not applicable, it is reported as 0.
SyntaxeDocsIetfQosBitRate (DOCS-IETF-QOS-MIB)
Module DOCS-IETF-QOS-MIB (ietf)
NomdocsIetfQosParamSetMaxTrafficRate
Accesreadonly
Statuscurrent
DescriptionMaximum sustained traffic rate allowed for this Service Flow in bits/sec. Must count all MAC frame data PDU from the bytes following the MAC header HCS to the end of the CRC. The number of bytes forwarded is limited during any time interval. The value 0 means no maximum traffic rate is enforced. This object applies to both upstream and downstream Service Flows. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set, the default value of this object is 0. If the parameter is not applicable, it is reported as 0.
SyntaxeDocsIetfQosBitRate (DOCS-IETF-QOS-MIB)