OID | 1.3.6.1.2.1.16.1.1.1.12 |
Module | RMON-MIB (CISCO) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | current |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms. |
Unite | Packets |
Syntaxe | Counter32 (SNMPv2-SMI) |
Module | RMON-MIB (DELL) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | current |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms. |
Unite | Packets |
Syntaxe | Counter32 (SNMPv2-SMI) |
Module | RFC1271-MIB (ietf) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | mandatory |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and were not an
integral number of octets in length or had
a bad Frame Check Sequence (FCS). |
Syntaxe | Counter (RFC1155-SMI) |
Module | RMON-MIB (ietf) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | current |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms. |
Unite | Packets |
Syntaxe | Counter32 (SNMPv2-SMI) |
Module | RMON-MIB (Alcatel) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | current |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms. |
Unite | Packets |
Syntaxe | Counter32 (SNMPv2-SMI) |
Module | RFC1271-MIB (Force10-9.14.2.1) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | mandatory |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and were not an
integral number of octets in length or had
a bad Frame Check Sequence (FCS). |
Syntaxe | Counter (RFC1155-SMI) |
Module | RMON-MIB (Force10-9.14.2.1) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | current |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms. |
Unite | Packets |
Syntaxe | Counter32 (SNMPv2-SMI) |
Module | RMON-MIB (FS) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | current |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms. |
Unite | Packets |
Syntaxe | Counter32 (SNMPv2-SMI) |
Module | RMON-MIB (Nexans) |
Nom | etherStatsJabbers |
Acces | readonly |
Status | mandatory |
Description | The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
Note that this definition of jabber is different
than the definition in IEEE-802.3 section 8.2.1.5
(10BASE5) and section 10.3.1.4 (10BASE2). These
documents define jabber as the condition where any
packet exceeds 20 ms. The allowed range to detect
jabber is between 20 ms and 150 ms. |
Syntaxe | Counter (RFC1155-SMI) |