MIB Discovery

Recherche :

1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 16 (rmon). 1 (statistics). 1 (etherStatsTable). 1 (etherStatsEntry). 4 (etherStatsOctets)
OID : 1.3.6.1.2.1.16.1.1.1.4
TXT : iso. org. dod. internet. mgmt. mib-2. rmon. statistics. etherStatsTable. etherStatsEntry. etherStatsOctets
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.16.1.1.1.4
Module RMON-MIB (CISCO)
NometherStatsOctets
Accesreadonly
Statuscurrent
Description The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
UniteOctets
SyntaxeCounter32 (SNMPv2-SMI)
Module RMON-MIB (DELL)
NometherStatsOctets
Accesreadonly
Statuscurrent
Description The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
UniteOctets
SyntaxeCounter32 (SNMPv2-SMI)
Module RFC1271-MIB (ietf)
NometherStatsOctets
Accesreadonly
Statusmandatory
DescriptionThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
SyntaxeCounter (RFC1155-SMI)
Module RMON-MIB (ietf)
NometherStatsOctets
Accesreadonly
Statuscurrent
Description The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
UniteOctets
SyntaxeCounter32 (SNMPv2-SMI)
Module RMON-MIB (Alcatel)
NometherStatsOctets
Accesreadonly
Statuscurrent
Description The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
UniteOctets
SyntaxeCounter32 (SNMPv2-SMI)
Module RFC1271-MIB (Force10-9.14.2.1)
NometherStatsOctets
Accesreadonly
Statusmandatory
DescriptionThe total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
SyntaxeCounter (RFC1155-SMI)
Module RMON-MIB (Force10-9.14.2.1)
NometherStatsOctets
Accesreadonly
Statuscurrent
Description The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
UniteOctets
SyntaxeCounter32 (SNMPv2-SMI)
Module RMON-MIB (FS)
NometherStatsOctets
Accesreadonly
Statuscurrent
Description The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
UniteOctets
SyntaxeCounter32 (SNMPv2-SMI)
Module RMON-MIB (Nexans)
NometherStatsOctets
Accesreadonly
Statusmandatory
Description The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
SyntaxeCounter (RFC1155-SMI)
D. Fournier - 2024