MIB Discovery
1926 modules enregistr├ęs
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 16 (rmon). 7 (filter). 2 (channelTable). 1 (channelEntry). 2 (channelIfIndex)
OID : 1.3.6.1.2.1.16.7.2.1.2
TXT : iso. org. dod. internet. mgmt. mib-2. rmon. filter. channelTable. channelEntry. channelIfIndex
Enfants
Pas d'enfants disponibles pour cet OID
D├ętails
OID1.3.6.1.2.1.16.7.2.1.2
Module RMON-MIB (CISCO)
NomchannelIfIndex
Accesreadwrite
Statuscurrent
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)
Module RMON-MIB (DELL)
NomchannelIfIndex
Accesreadwrite
Statuscurrent
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)
Module RFC1271-MIB (ietf)
NomchannelIfIndex
Accesreadwrite
Statusmandatory
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in [4,6]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)
Module RMON-MIB (ietf)
NomchannelIfIndex
Accesreadwrite
Statuscurrent
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)
Module RMON-MIB (Alcatel)
NomchannelIfIndex
Accesreadwrite
Statuscurrent
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)
Module RFC1271-MIB (Force10-9.14.2.1)
NomchannelIfIndex
Accesreadwrite
Statusmandatory
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in [4,6]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)
Module RMON-MIB (Force10-9.14.2.1)
NomchannelIfIndex
Accesreadwrite
Statuscurrent
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)
Module RMON-MIB (FS)
NomchannelIfIndex
Accesreadwrite
Statuscurrent
DescriptionThe value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
SyntaxeInteger32 (1...65535)