MIB Discovery

Recherche :

1932 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 17 (dot1dBridge). 7 (qBridgeMIB). 1 (qBridgeMIBObjects). 4 (dot1qVlan). 3 (dot1qVlanStaticTable)
OID : 1.3.6.1.2.1.17.7.1.4.3
TXT : iso. org. dod. internet. mgmt. mib-2. dot1dBridge. qBridgeMIB. qBridgeMIBObjects. dot1qVlan. dot1qVlanStaticTable
Enfants
Détails
OID1.3.6.1.2.1.17.7.1.4.3
Module Q-BRIDGE-MIB (CISCO)
Nomdot1qVlanStaticTable
Statuscurrent
DescriptionA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Module Q-BRIDGE-MIB (DELL)
Nomdot1qVlanStaticTable
Statuscurrent
DescriptionA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Module Q-BRIDGE-MIB (ietf)
Nomdot1qVlanStaticTable
Statuscurrent
DescriptionA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Module Q-BRIDGE-MIB (Alcatel)
Nomdot1qVlanStaticTable
Statuscurrent
DescriptionA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Module Q-BRIDGE-MIB (Force10-9.14.2.1)
Nomdot1qVlanStaticTable
Statuscurrent
DescriptionA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Module Q-BRIDGE-MIB (FS)
Nomdot1qVlanStaticTable
Statuscurrent
DescriptionA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
Module Q-BRIDGE-MIB (Nexans)
Nomdot1qVlanStaticTable
Statuscurrent
DescriptionA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
D. Fournier - 2025