MIB Discovery

Recherche :

1932 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 17 (dot1dBridge). 7 (qBridgeMIB). 1 (qBridgeMIBObjects). 5 (dot1vProtocol). 1 (dot1vProtocolGroupTable). 1 (dot1vProtocolGroupEntry). 2 (dot1vProtocolTemplateProtocolValue)
OID : 1.3.6.1.2.1.17.7.1.5.1.1.2
TXT : iso. org. dod. internet. mgmt. mib-2. dot1dBridge. qBridgeMIB. qBridgeMIBObjects. dot1vProtocol. dot1vProtocolGroupTable. dot1vProtocolGroupEntry. dot1vProtocolTemplateProtocolValue
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.17.7.1.5.1.1.2
Module Q-BRIDGE-MIB (CISCO)
Nomdot1vProtocolTemplateProtocolValue
Accesnoaccess
Statuscurrent
Description The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
SyntaxeOctetString
Module Q-BRIDGE-MIB (ietf)
Nomdot1vProtocolTemplateProtocolValue
Accesnoaccess
Statuscurrent
Description The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
SyntaxeOctetString
Module Q-BRIDGE-MIB (Alcatel)
Nomdot1vProtocolTemplateProtocolValue
Accesnoaccess
Statuscurrent
Description The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
SyntaxeOctetString
Module Q-BRIDGE-MIB (Force10-9.14.2.1)
Nomdot1vProtocolTemplateProtocolValue
Accesnoaccess
Statuscurrent
Description The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
SyntaxeOctetString
Module Q-BRIDGE-MIB (FS)
Nomdot1vProtocolTemplateProtocolValue
Accesnoaccess
Statuscurrent
Description The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
SyntaxeOctetString
D. Fournier - 2025