MIB Discovery

Recherche :

1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 2 (interfaces). 2 (ifTable). 1 (ifEntry). 5 (ifSpeed)
OID : 1.3.6.1.2.1.2.2.1.5
TXT : iso. org. dod. internet. mgmt. mib-2. interfaces. ifTable. ifEntry. ifSpeed
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.2.2.1.5
Module IF-MIB (CISCO)
NomifSpeed
Accesreadonly
Statuscurrent
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
SyntaxeGauge32 (SNMPv2-SMI)
Module RFC1213-MIB (DELL)
NomifSpeed
Accesreadonly
Statusmandatory
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
SyntaxeGauge (RFC1155-SMI)
Module IF-MIB (DELL)
NomifSpeed
Accesreadonly
Statuscurrent
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
SyntaxeGauge32 (SNMPv2-SMI)
Module IF-MIB (ietf)
NomifSpeed
Accesreadonly
Statuscurrent
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
SyntaxeGauge32 (SNMPv2-SMI)
Module RFC1213-MIB (ietf)
NomifSpeed
Accesreadonly
Statusmandatory
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
SyntaxeGauge (RFC1155-SMI)
Module IF-MIB (Alcatel)
NomifSpeed
Accesreadonly
Statuscurrent
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
SyntaxeGauge32 (SNMPv2-SMI)
Module RFC1213-MIB (Force10-9.14.2.1)
NomifSpeed
Accesreadonly
Statusmandatory
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
SyntaxeGauge (RFC1155-SMI)
Module IF-MIB (Force10-9.14.2.1)
NomifSpeed
Accesreadonly
Statuscurrent
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
SyntaxeGauge32 (SNMPv2-SMI)
Module IF-MIB (FS)
NomifSpeed
Accesreadonly
Statuscurrent
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
SyntaxeGauge32 (SNMPv2-SMI)
Module RFC1213-MIB (FS)
NomifSpeed
Accesreadonly
Statusmandatory
DescriptionAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
SyntaxeGauge (RFC1155-SMI)
D. Fournier - 2024