| OID | 1.3.6.1.2.1.2.2.1.6 |
| Module | IF-MIB (CISCO) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | current |
| Description | The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must define the bit and byte ordering and the format of the
value of this object. For interfaces which do not have such
an address (e.g., a serial line), this object should contain
an octet string of zero length. |
| Syntaxe | PhysAddress (SNMPv2-TC) |
| Module | RFC1213-MIB (DELL) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | mandatory |
| Description | The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length. |
| Syntaxe | PhysAddress (RFC1213-MIB) |
| Module | IF-MIB (DELL) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | current |
| Description | The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must define the bit and byte ordering and the format of the
value of this object. For interfaces which do not have such
an address (e.g., a serial line), this object should contain
an octet string of zero length. |
| Syntaxe | PhysAddress (SNMPv2-TC) |
| Module | IF-MIB (ietf) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | current |
| Description | The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must define the bit and byte ordering and the format of the
value of this object. For interfaces which do not have such
an address (e.g., a serial line), this object should contain
an octet string of zero length. |
| Syntaxe | PhysAddress (SNMPv2-TC) |
| Module | RFC1213-MIB (ietf) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | mandatory |
| Description | The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length. |
| Syntaxe | PhysAddress (RFC1213-MIB) |
| Module | IF-MIB (Alcatel) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | current |
| Description | The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must define the bit and byte ordering and the format of the
value of this object. For interfaces which do not have such
an address (e.g., a serial line), this object should contain
an octet string of zero length. |
| Syntaxe | PhysAddress (SNMPv2-TC) |
| Module | RFC1213-MIB (Force10-9.14.2.1) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | mandatory |
| Description | The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length. |
| Syntaxe | PhysAddress (RFC1213-MIB) |
| Module | IF-MIB (Force10-9.14.2.1) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | current |
| Description | The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must define the bit and byte ordering and the format of the
value of this object. For interfaces which do not have such
an address (e.g., a serial line), this object should contain
an octet string of zero length. |
| Syntaxe | PhysAddress (SNMPv2-TC) |
| Module | IF-MIB (FS) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | current |
| Description | The interface's address at its protocol sub-layer. For
example, for an 802.x interface, this object normally
contains a MAC address. The interface's media-specific MIB
must define the bit and byte ordering and the format of the
value of this object. For interfaces which do not have such
an address (e.g., a serial line), this object should contain
an octet string of zero length. |
| Syntaxe | PhysAddress (SNMPv2-TC) |
| Module | RFC1213-MIB (FS) |
| Nom | ifPhysAddress |
| Acces | readonly |
| Status | mandatory |
| Description | The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length. |
| Syntaxe | PhysAddress (RFC1213-MIB) |