MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 37 (atmMIB). 1 (atmMIBObjects). 1 (atmTrafficDescriptorTypes). 11 (atmNoClpTaggingNoScr)
OID : 1.3.6.1.2.1.37.1.1.11
TXT : iso. org. dod. internet. mgmt. mib-2. atmMIB. atmMIBObjects. atmTrafficDescriptorTypes. atmNoClpTaggingNoScr
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.37.1.1.11
Module ATM-TC-MIB (CISCO)
NomatmNoClpTaggingNoScr
Statuscurrent
DescriptionThis traffic descriptor type is for no CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to connections following the UBR.2 conformance definition .
Module ATM-TC-MIB (ietf)
NomatmNoClpTaggingNoScr
Statuscurrent
DescriptionThis traffic descriptor type is for no CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to connections following the UBR.2 conformance definition .
Module ATM-TC-MIB (Alcatel)
NomatmNoClpTaggingNoScr
Statuscurrent
DescriptionThis traffic descriptor type is for no CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to connections following the UBR.2 conformance definition .