MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 37 (atmMIB). 1 (atmMIBObjects). 14 (atm2MIB). 1 (atm2MIBObjects). 3 (atmSigStatTable). 1 (atmSigStatEntry). 10 (atmSigEmitCldPtyEvents)
OID : 1.3.6.1.2.1.37.1.14.1.3.1.10
TXT : iso. org. dod. internet. mgmt. mib-2. atmMIB. atmMIBObjects. atm2MIB. atm2MIBObjects. atmSigStatTable. atmSigStatEntry. atmSigEmitCldPtyEvents
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.37.1.14.1.3.1.10
Module ATM2-MIB (CISCO)
NomatmSigEmitCldPtyEvents
Accesreadonly
Statuscurrent
Description Number of Called Party Responsible For Unsuccessful Call transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is transmitted (Note: These cause values apply to both UNI3.0 and UNI3.1): Cause Value Meaning 17 user busy 18 no user responding 21 call rejected 22 number changed 23 user rejects all calls with calling line identification restriction (CLIR) 27 destination out of order 31 normal, unspecified 88 incompatible destination NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be counted. Note: Cause Value #30 'response to STATUS ENQUIRY' was not included in this memo since it did not apply to a hard failure.
SyntaxeCounter32 (SNMPv2-SMI)
Module ATM2-MIB (ietf)
NomatmSigEmitCldPtyEvents
Accesreadonly
Statuscurrent
Description Number of Called Party Responsible For Unsuccessful Call transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is transmitted (Note: These cause values apply to both UNI3.0 and UNI3.1): Cause Value Meaning 17 user busy 18 no user responding 21 call rejected 22 number changed 23 user rejects all calls with calling line identification restriction (CLIR) 27 destination out of order 31 normal, unspecified 88 incompatible destination NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be counted. Note: Cause Value #30 'response to STATUS ENQUIRY' was not included in this memo since it did not apply to a hard failure.
SyntaxeCounter32 (SNMPv2-SMI)