MIB Discovery

Recherche :

1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 2 (mgmt). 1 (mib-2). 52 (intSrv). 1 (intSrvObjects). 2 (intSrvFlowTable). 1 (intSrvFlowEntry). 10 (intSrvFlowPort)
OID : 1.3.6.1.2.1.52.1.2.1.10
TXT : iso. org. dod. internet. mgmt. mib-2. intSrv. intSrvObjects. intSrvFlowTable. intSrvFlowEntry. intSrvFlowPort
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.2.1.52.1.2.1.10
Module INT-SERV-MIB (CISCO)
NomintSrvFlowPort
Accesreadwrite
Statuscurrent
DescriptionThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
SyntaxePort (INT-SERV-MIB)
Module INTEGRATED-SERVICES-MIB (CISCO)
NomintSrvFlowPort
Accesreadwrite
Statuscurrent
DescriptionThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
SyntaxePort (INTEGRATED-SERVICES-MIB)
Module INTEGRATED-SERVICES-MIB (DELL)
NomintSrvFlowPort
Accesreadwrite
Statuscurrent
DescriptionThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
SyntaxePort (INTEGRATED-SERVICES-MIB)
Module INTEGRATED-SERVICES-MIB (ietf)
NomintSrvFlowPort
Accesreadwrite
Statuscurrent
DescriptionThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
SyntaxePort (INTEGRATED-SERVICES-MIB)
Module INTEGRATED-SERVICES-MIB (Force10-9.14.2.1)
NomintSrvFlowPort
Accesreadwrite
Statuscurrent
DescriptionThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
SyntaxePort (INTEGRATED-SERVICES-MIB)
Module INTEGRATED-SERVICES-MIB (FS)
NomintSrvFlowPort
Accesreadwrite
Statuscurrent
DescriptionThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
SyntaxePort (INTEGRATED-SERVICES-MIB)
D. Fournier - 2024