| OID | 1.3.6.1.4.1.266.20.3.1.1.21 |
| Module | NEXANS-BM-MIB (Nexans) |
| Nom | portPoeAdminState |
| Acces | readwrite |
| Status | current |
| Description | If no POE adapter is installed this object is read-only and will always report notSupported(1). The possible values are: notSupported(1): No adapter installed or not supported for that port (i.e. uplink port). off(2): Adapter installed but inline power for that port is switched off. forcedOn(3): Adapter installed and inline power is asserted permanently. In the case of an IEEE802.3af adapter this setting will disable the IEEE802.3af automatic detection. dot3af15W(4): This setting is only supported if a IEEE802.3af/at/bt adapter is installed. The adapter automatically detects if the connected device is IEEE802.3af compliant, and will assert the power. dot3af30W(7): This setting is only supported if a IEEE802.3af/at/bt adapter is installed. The adapter automatically detects if the connected device is IEEE802.3af compliant but requires a higher power up to 30 W, and will assert the power. In this case the power class is ignored. dot3at30W(8): This setting is only supported if a IEEE802.3at/bt adapter is installed. The adapter automatically detects if the connected device is IEEE802.3af/at compliant, and will assert the power. dot3bt(9): This setting is only supported if a IEEE802.3bt adapter is installed. The adapter automatically detects if the connected device is IEEE802.3af/at/bt compliant, and will assert the power. overloadFail(5): Adapter installed but inline power for that port is automatically switched off because of a overload condition at that port. reset(6): Disables output voltage for a period of 6 seconds (selfclearing after write) |
| Syntaxe | Enumeration (1-notSupported, 2-off, 3-forcedOn, 4-dot3af15W, 5-overloadFail, 6-reset, 7-dot3af30W, 8-dot3at30W, 9-dot3bt) |