MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 351 (stratacom). 110 (basis). 3 (cardSpecific). 17 (vismConfig). 2 (vismVoIpGrp). 2 (vismRtcpRepInterval)
OID : 1.3.6.1.4.1.351.110.3.17.2.2
TXT : iso. org. dod. internet. private. enterprises. stratacom. basis. cardSpecific. vismConfig. vismVoIpGrp. vismRtcpRepInterval
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.351.110.3.17.2.2
Module CISCO-VISM-MODULE-MIB (CISCO)
NomvismRtcpRepInterval
Accesreadwrite
Statuscurrent
DescriptionThis attribute defines the RTCP(Real-time Transport Control Protocol) report interval (defined in RFC 1889). This indicates the interval at which the RTCP reports should be sent to the participating members. The RTCP reports are not sent at a fixed rate at this interval. Rather, this value is used as a base value to arrive at a random number between 0.5 and 1.5 times this value. This interval timer also serves the purpose of RTP packets receive timer. At every vismRtcpRecvMultiplier times this interval, where vismRtcpRecvMultiplier is specified in the MIB object below, a check is made on a VoIP connection (which is in SENDRECV or RECVONLY xGCP modes) to see if any RTP packets have been received. If not, gateway-initiated DLCX should be sent to the Call Agent. Currently, this interval timer is a card-specific value, which means the value is configurable on a per card basis and not on a per call basis. This value is applicable for VoIP adaptation only.
Unitemilliseconds
SyntaxeInteger32 (500...15000)