| Description | This is not a standard RFC 1407 DS1 variable, it is
specific to BASIS implementation. It specifies the line length:
1 - 0 to 110 ft (T1 line only)
2 - 110 to 220 ft (T1 line only)
3 - 220 to 330 ft (T1 line only)
4 - 330 to 440 ft (T1 line only)
5 - 440 to 550 ft (T1 line only)
6 - 550 to 660 ft (T1 line only)
7 - greater than 660 ft (T1 line only)
8 - 75 ohms (E1 line only (BNC))
9 - 120 ohms (E1 line only (DB-15))
The default value for T1 is 1, for E1, if the connector
type is DB15 then the default is 9, if BNC, it's 8.
For FRSM-2CT3, the line length of DS1 has no meaning
as there are no physical DS1 lines. So, for this
card, the value is set to notRequired (16). |
| Syntaxe | Enumeration (1-lineLength0To110Feet, 2-lineLength110To220Feet, 3-lineLength220To330Feet, 4-lineLength330To440Feet, 5-lineLength440To550Feet, 6-lineLength550To660Feet, 7-lineLength660FeetPlus, 8-lineLength-75-Ohm, 9-lineLength-120-Ohm, 10-lineLength0To131Feet, 11-lineLength131To262Feet, 12-lineLength262To393Feet, 13-lineLength393To524Feet, 14-lineLength524To655Feet, 15-lineLength655FeetPlus, 16-notRequired) |