MIB Discovery

Recherche :

1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 351 (stratacom). 110 (basis). 5 (basisServices). 5 (voice). 3 (vismChanGrp). 4 (vismAal2CidGrp). 1 (vismAal2CidCnfTable). 1 (vismAal2CidEntry). 15 (vismAal2CidICSEnable)
OID : 1.3.6.1.4.1.351.110.5.5.3.4.1.1.15
TXT : iso. org. dod. internet. private. enterprises. stratacom. basis. basisServices. voice. vismChanGrp. vismAal2CidGrp. vismAal2CidCnfTable. vismAal2CidEntry. vismAal2CidICSEnable
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.351.110.5.5.3.4.1.1.15
Module CISCO-VISM-ATM-TRUNK-MIB (CISCO)
NomvismAal2CidICSEnable
Accesreadwrite
Statuscurrent
DescriptionThis object is used to enable or disable the ICS(Idle Channel Suppression) for a CID. This can be specified while adding the CID and cannot be modified. When the Idle Channel Suppression is enabled the DSP will look for the idle CAS (ABCD bits) pattern specified in ds0IdleCode in CISCO-VISM-DSX0-MIB MIB. If the idle pattern is present the DSP stops generating voice packets towards ATM side. By default the ds0IdleCode will be zero unless the user has configured it before adding the CID. If the ds0IdleCode is changed after the CID is added it will have no affect unless the card is reset. ICS is applicable only for trunking application, in case of switching there is no need for ICS as the calls are teared down and set up dynamically.
SyntaxeTruthValue (SNMPv2-TC)
D. Fournier - 2024