MIB Discovery

Recherche :

1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 6527 (timetra). 3 (timetraProducts). 1 (tmnxSRMIB). 2 (tmnxSRObjs). 11 (tmnxOamTestObjs). 1 (tmnxOamPingObjs). 3 (tmnxOamPingCtlTable). 1 (tmnxOamPingCtlEntry). 8 (tmnxOamPingCtlOrigSdpId)
OID : 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.8
TXT : iso. org. dod. internet. private. enterprises. timetra. timetraProducts. tmnxSRMIB. tmnxSRObjs. tmnxOamTestObjs. tmnxOamPingObjs. tmnxOamPingCtlTable. tmnxOamPingCtlEntry. tmnxOamPingCtlOrigSdpId
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.6527.3.1.2.11.1.3.1.8
Module ALCATEL-IND1-TIMETRA-OAM-TEST-MIB (Alcatel)
NomtmnxOamPingCtlOrigSdpId
Accesreadwrite
Statuscurrent
DescriptionSpecifies the originating SDP-ID to be used for performing a spd-ping or mtu-ping operation. This parameter is required only if tmnxOamPingCtlTestMode has a value of either 'sdpPing' or 'mtuPing'. The far-end address of the specified SPD-ID is the expected responder-id within each OAM reply message received. The specified SPD-ID defines the encapsulation of the SDP tunnel encapsulation used to reach the far-end. This can be IP/GRE or MPLS. The value of tmnxOamPingCtlFcName is used to define the outgoing forwarding class used for the SDP encapsulation. If the value of tmnxOamPingCtlOrigSdpId is invalid, or the SDP is administratively down, or unavailable, the OAM Echo request message probe is not sent and an appropriate error value is written to tmnxOamPingHistoryStatus for that probe entry. Once the interval timer expires, the next probe attempt will be made if required.
SyntaxeSdpId (ALCATEL-IND1-TIMETRA-SERV-MIB)
Module TIMETRA-OAM-TEST-MIB (Alcatel)
NomtmnxOamPingCtlOrigSdpId
Accesreadwrite
Statuscurrent
DescriptionSpecifies the originating SDP-ID to be used for performing a spd-ping or mtu-ping operation. This parameter is required only if tmnxOamPingCtlTestMode has a value of either 'sdpPing' or 'mtuPing'. The far-end address of the specified SPD-ID is the expected responder-id within each OAM reply message received. The specified SPD-ID defines the encapsulation of the SDP tunnel encapsulation used to reach the far-end. This can be IP/GRE or MPLS. The value of tmnxOamPingCtlFcName is used to define the outgoing forwarding class used for the SDP encapsulation. If the value of tmnxOamPingCtlOrigSdpId is invalid, or the SDP is administratively down, or unavailable, the OAM Echo request message probe is not sent and an appropriate error value is written to tmnxOamPingHistoryStatus for that probe entry. Once the interval timer expires, the next probe attempt will be made if required.
SyntaxeSdpId (TIMETRA-SERV-MIB)
D. Fournier - 2024