MIB Discovery

Recherche :

1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 6527 (timetra). 3 (timetraProducts). 1 (tmnxSRMIB). 2 (tmnxSRObjs). 2 (tmnxHwObjs). 4 (tmnxPortObjs). 5 (tmnxSonetTable). 1 (tmnxSonetEntry). 17 (tmnxSonetReportAlarmStatus)
OID : 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17
TXT : iso. org. dod. internet. private. enterprises. timetra. timetraProducts. tmnxSRMIB. tmnxSRObjs. tmnxHwObjs. tmnxPortObjs. tmnxSonetTable. tmnxSonetEntry. tmnxSonetReportAlarmStatus
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17
Module ALCATEL-IND1-TIMETRA-PORT-MIB (Alcatel)
NomtmnxSonetReportAlarmStatus
Accesreadonly
Statuscurrent
Description The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais(2) Indicates line alarm indication signal errors. lrdi(3) Indicates line remote defect indication errors. LRDIs are caused by remote LOF, LOC, and LOS. ss1f(4) Indicates section synchronization failure as reported by the S1 byte. sb1err(5) Indicates section B1 errors. lb2erSd(6) Indicates line signal degradation BER errors. lb2erSf(7) Indicates line signal failure BER errors. slof(8) Indicates section loss of frame errors. slos(9) Indicates section loss of signal errors. stxptr(10) Indicates a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. srxptr(11) Indicates a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per sonet path. lrei(12) Indicates a line error condition raised by the remote as a result of B1 errors received from this node.
SyntaxeBits (0-notUsed, 1-loc, 2-lais, 3-lrdi, 4-ss1f, 5-sb1err, 6-lb2erSd, 7-lb2erSf, 8-slof, 9-slos, 10-stxptr, 11-srxptr, 12-lrei)
Module TIMETRA-PORT-MIB (Alcatel)
NomtmnxSonetReportAlarmStatus
Accesreadonly
Statuscurrent
Description The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of clock which causes the operational state of the port to be downed. lais(2) Indicates line alarm indication signal errors. lrdi(3) Indicates line remote defect indication errors. LRDIs are caused by remote LOF, LOC, and LOS. ss1f(4) Indicates section synchronization failure as reported by the S1 byte. sb1err(5) Indicates section B1 errors. lb2erSd(6) Indicates line signal degradation BER errors. lb2erSf(7) Indicates line signal failure BER errors. slof(8) Indicates section loss of frame errors. slos(9) Indicates section loss of signal errors. stxptr(10) Indicates a section synchronization error on the transmit side. Indicates if there is a positive or negative justification count per channel. srxptr(11) Indicates a section synchronization error on the receive side. Indicates if there is a positive or negative justification count per sonet path. lrei(12) Indicates a line error condition raised by the remote as a result of B1 errors received from this node.
SyntaxeBits (0-notUsed, 1-loc, 2-lais, 3-lrdi, 4-ss1f, 5-sb1err, 6-lb2erSd, 7-lb2erSf, 8-slof, 9-slos, 10-stxptr, 11-srxptr, 12-lrei)
D. Fournier - 2024